Sokkia SRX1 Operator's Manual page 83

PROCEDURE Entering coordinates
1. Select "Backsight setup" in <Coordinate>. <Set
H angle> is displayed.
• <Set H angle> can also be displayed from the
screen in step 4 of "15.1 Entering Instrument
Station Data".
2. Select the Key in coord tab and enter the
backsight station coordinates.
• [READ]: Reads in coordinate data registered in
Program mode (SDR) .

Series SRX SDR Software Reference
Manual
• [SRCH]: Rotates the SRX in the direction of the
desired angle.
• Sight the backsight station and press [DIST].
Press [STOP] to display the distance calculated
from coordinates, the measured distance, and
the difference between the two. Press [YES] to
set the azimuth angle and display <Coord.
measurement>.
• [None]: Switches horizontal angle setting
method.

Horizontal angle settings
3. Press [OK] to set the input values. <Coord.
measurement> is displayed.
15. COORDINATE MEASUREMENT
75