Target System - Sokkia SRX1 Operator's Manual

25.TARGET SYSTEM

The following are all special accessories (sold separately).
• Because all Sokkia reflecting prisms and accessories have standardized screws, it is possible
to combine these prisms, accessories, etc. according to your objectives.
• Because these targets (*2) are coated with fluorescent paint, they reflect when there is little light.

• When using a reflecting prism equipped with a target for distance and angle measurements, be sure
to direct the reflective prism correctly and sight the center of the prism target accurately.
• Each reflective prism (*1) has its own prism constant value. When changing prisms, be sure to
change the prism constant correction value.
• To use the triple prism assembly AP31 or AP32 as a single prism for short distance measurements,
mount the single reflective prism AP01AR in the center mounting hole of the prism holder.
Targets
Prism
Prism holders
APS12R-AR APS11R-AR
AP01AR
Prism height adaptors
Prism system tribrachs
series
APS12R-AR APS11R-AR APS34R-AR APS31R-AR
153