13.ANGLE MEASUREMENT
This section explains the procedures for basic angle measurement in Basic mode.
• It is possible to allocate softkeys in measurement menus to suit various applications and the ways
that different operators handle the instrument.
"21.6 Allocating Key Functions"
13.1
Measuring the Horizontal Angle between Two Points
(Horizontal Angle 0°)
Use the "0SET" function to measure the included angle between two points. The horizontal angle can
be set to 0 at any direction.
PROCEDURE
1. Sight the first target as at right.
"10.3 TARGET SIGHTING"
2. In the first page of the Meas mode screen, press
[0SET].
[0SET] will flash, so press [0SET] again.
The horizontal angle at the first target becomes 0°.
3. Sight the second target.
60