Sokkia SRX1 Operator's Manual page 75

PROCEDURE
1. Accurately sight the target manually.

"11.3 Manually Sighting the Target"
2. Press {SETTINGS} to switch to SETTINGS mode
and select the Aiming tab or press [AIM] in Meas
mode.

Allocating [AIM]: "21.6 Allocating Key
Functions"
When [AIM] is pressed, a gauge indicating light
intensity is displayed.
• The more
quantity of reflected light.
•
If " " is displayed, only enough light for the

measurement is returned.
•
When " " is not displayed, accurately resight

the target.
[BEEP]/[OFF]: Sets a buzzer sound when
measurement is possible. Press to switch on
and off.
[DIST]: Returns to Meas mode and starts
distance measurement. This softkey is not
displayed when the returned signal checking
function is accessed from Program mode (SDR).
3. Press [OFF] to finish signal checking.
Press {ESC} or tap the cross in the top-right
corner to return to the previous screen.

• When is displayed persistently, contact your Sokkia agent.
• If no key operations are performed for two minutes, the display automatically returns to the previous
screen.
displayed, the greater the
14. DISTANCE MEASUREMENT
67