Sokkia SRX1 Operator's Manual page 117

2. Sight the second target, and press [DIST] to start
measurement.
Press [STOP] to stop measurement.
The following values are displayed:
S : Slope distance of the starting position and
2nd target.
H : Horizontal distance of the starting position
and 2nd position.
V : Height difference of the starting position and
2nd target.

• When measurement data already exists the
screen of step 3 is displayed and measurement
starts.
3. Sight the next target and press [MLM] to
begin observation. Slope distance, horizontal
distance and height difference between
multiple points and the starting position can
be measured this way.
• Press [DIST] to re-observe the starting
position. Sight the starting position and
press [DIST].
• When [MOVE] is pressed, the last target
measured becomes the new starting
position to perform missing line
measurement of the next target.

4. "19.2 Changing the Starting Point"
5. Press {ESC} or tap the cross in the top-right
corner to end missing line measurement.
19. MISSING LINE MEASUREMENT
Results for measurement between starting
position and second target
Results for current point
109