Digital Data Output; Output Mode; Built-In Printer - Ahlborn ALMEMO 6290-7B Operating Instructions Manual

Measuring instrument with built-in printer
Table of Contents

Advertisement

8. DIGITAL DATA OUTPUT

For data output the ALMEMO
printer has, at first, the integrated thermal printer and then also a serial
interface. During a measurement the measured values of all connected
sensors are scanned in cycles and, according to the output mode, provided as
output (see 8.1). The built-in printer can present the measured values as a list
or a line plot. The output via interface is available with three format options.
Optionally, the measured values can be buffered in the instrument and can
later be represented in any output format. As the measured values are being
logged with the date and time, these parameters should be programmed
accordingly (see 7.2.4). Apart from the measured values, it is also possible to
provide an output of the programming of the sensors and of the instrument.

8.1 Output Mode

The following output options can be set by using the output mode in function
´OM´:
Display Printout Function
dr
PRINT
Pl 1
PLOT 1
Pl 2
PLOT 2
U
U
S
-
Function OUTPUT MODE ´OM´
Selection with key FUNCTION...
After operating the key ENTER the output mode flashes and can be altered by
using the keys " and #. The selected output mode is accepted by pressing the
key ENTER once again. During PRINT mode the arrow ´LIST´, and during PLOT
mode the arrow ´GRAPH´, and in case of an output to the serial interface the
arrow ´RS232´, is indicated for control.

8.2 Built-in Printer

The measuring instrument with built-in printer is generally equipped with a
dot-matrix thermal printing unit that can either print 40 alphanumerical
characters per line or 280 x 8 pixels graphically. Two operating modes PRINT
and PLOT are available and can be set by selecting the output mode. In both
modes the measured values are collected in a cycle and are provided
accordingly. In addition, it is also possible to print the programming or all
maximum and minimum values.
6290-7B measuring instrument with built-in
list output to the built-in printer
line plot in 1 diagram on the built-in printer
line plot in 2 diagrams on the built-in printer
list output to the serial interface
storing of the measured values only (option S)
ALMEMO
6290-7B
Digital Data Output
P L
2
O M
34

Advertisement

Table of Contents
loading

Table of Contents