Description Socket Adapter; Digital Almemo ® D7 Measuring Sensor; Operation As Probe On Almemo ® V7 Measuring Instruments - Ahlborn ZED7 00-ABx Instruction Manual

4 Product

4.4 Description socket adapter

The socket adapter with order number ZE 2000-PA is optionally available. It is
intended as a safe tool for measuring voltage, current and power on circuits
electrically connected directly to the low-voltage network (CAT II). For safety
reasons, the short-circuit plug can only be connected to the black socket (COM)
and the blue socket (A) and is only used if no current measurement is required and
the circuit is only to be closed.
Socket
Short-circuit plug
Power plug
®
4.5 Digital ALMEMO D7 measuring sensor
Building on the already self-sufficient ALMEMO -D6 connectors with serial
®
interface, the possibilities of independence from the measuring device have been
consistently further developed and a completely new V7 measuring system has
been created. Efficient measurement of fast and slow probes with any range of
measured values is possible at the same time. New measurement functions and
ranges not supported by the ALMEMO devices themselves can be configured and
®
used via a menu stored in the probe. This makes the new ALMEMO V7 system
®
incomparably flexible and future-proof. The communication from sensor to
measuring device is generally carried out via a serial interface. This means that the
D7 sensors can only be connected to new ALMEMO ® V7 devices.
®
4.6 Operation as probe on ALMEMO V7 measuring
instruments
ALMEMO ® D7 sensors supply their final digital measured values of 1 to 10
measuring channels via the serial interface to the ALMEMO V7 device, where
®
they are simply stored or output. Function channels can only be programmed and
used by the device. If a measuring channel is not to be displayed, the measuring
- 11 –