Digital Data Output
PLOT 1 (1 diagram with 4 chann. at max.):
8.4.1 Plot Range
The plot range must be specified for each channel that has to be plotted, i.e.
the start of the plot range must be programmed in function ´PS´ and the end of
the plot range must be programmed in function ´PE´. If more channels are
programmed than can be plotted, only the first 4 or 2 will be considered.
Start of plot range:
End of plot range:
During input (see 5.4) it must be considered that the plot range end is always
larger than the plot range start.
The plot range limits can be cleared by using the keys ENTER, Clr.
37
Selection with key FUNCTION...
Selection with key FUNCTION...
ALMEMO
6290-7B
PLOT 2 (2 diagrams side by side):
1: 0 0 0.0
1: 1 0 0.0
P S
P E