Ahlborn ALMEMO 6290-7B Operating Instructions Manual page 19

Measuring instrument with built-in printer
Table of Contents

Advertisement

After a reinitialisation (see 3.4) the basic functions (bolded in table) for
operating the instrument with built-in printer are available by using the keys
MEASURE and FUNCTION. More functions are available and can automatically or
manually be activated, as required, for correcting measured values and for
data transfer. This provides fast access and a reduced risk of incorrect entries.
However, to have any function available in case it is required, all functions can
be temporarily activated, i.e. until the instrument is switched off again:
Activate all functions by switching on with the key
The functions can be activated by repeatedly operating the keys MEASURE or
FUNCTION. If a key is pressed and held for longer than one second the previous
function can be selected again. The functions are identified by a two digit
abbreviation instead of the dimension. In the display the abbreviation for the
function follows the value of the function. In the case of sensor parameters the
channel number is also included:
MEAS. VALUE
Meas. Functions
Meas. value
Max value (Hi)
Min value (Lo)
Memory (option S)
&
FUNCTION
Memory functions
Pplot range - start
Plot range - end
Free memory
Output mode
Start time
End time
Start date
End date
Automatic activation of the functions by:
For a data output starting from the measuring function ´MY´ the key FUNCTION
can be used to call various memory functions, which are entirely independent
Abbrev.
1: 114.3 °C
1: 123.4 MH
1: 023.4 ML
1: 113.2 MY
1: 000.0 PS
1: 100.0 PE
126.1 FR
PL 2
OM
10:00:00 ST
10:30:00 ET
01.05.99 SD
01.05.99 ED
" Zero point correction
" Slope (gain) correction
^ Ambient temperature
^ Emissivity factor
* Baud rate
* Device address
~
* interface modules
" pH probes
ALMEMO
ENTER
FUNCTION
ProgrammingFunctions
Output mode
Paper feed
or print cycle
Time
Date
Range
Plot range - start
Plot range - end
Limit value Max (Hi)
Limit value Min (Lo)
Locking mode
Base value
Factor
Exponent
Atmosph. pressure
^ infrared sensors
~
humidity, dynam. press. and O
6290-7B
Display and Keyboard
pressed and held.
Abbrev.
PL 2
OM
320.00 PF
00:15:00 PC
12:34:56 TM
31.12.99 DA
1: NiCr R
1: 000.0 PS
1: 100.0 PE
1: 123.0 LH
1:-010.0 LL
1: 0005 LM
1: ---- BA
1: ---- FA
1:
0 EX
1: ---- ZC
1: ---- SC
1: 250.0 AT
1: 0.950 EF
9600 BR
00 A
1013 mb
sensors
2
18

Advertisement

Table of Contents
loading

Table of Contents