Device Address And Networking - Ahlborn ALMEMO 6290-7B Operating Instructions Manual

Digital Data Output
Function
PLOT START
PLOT END
LIMIT VALUE, MAX LH F LV MAX: 01: -0100.0 °C
LIMIT VALUE, MIN
LOCKING
BASE
FACTOR
EXPONENT
ZERO POINT
SLOPE
Memory Functions:
MEMORY FREE
START TIME
STOP TIME
START DATE
END DATE

8.5.4 Device Address and Networking

®
All ALMEMO instruments can be very easily networked to centrally acquire the
measured values of several instruments that are located at different places
(see manual 5.3). For communicating with networked devices it is mandatory
that each device has its own address as only one device is allowed to respond
to each command. Therefore, before any network operation it is necessary
that all connected devices are set to different device numbers. The function
DEVICE ADDRESS ´ A´ is available for this purpose. It can be selected with
the key FUNCTION and, at first, the currently set device number, which is
normally factory-set to 00, is displayed. It can then be modified by a normal
data input (see 5.4).
Function DEVICE ADDRESS ´ A´
Selection with key:
During network operation only consecutive numbers between 01 and 99 should
be entered so that the device 00 is not addressed unjustifiably in case of a
power interruption.
41
Ab Ky Printout
PS F ANALOG START:01: +0000.0 °C
PE F ANALOG END: 01: +0100.0 °C
LL F LV MIN: 01: +0020.0 °C
LM F
CH ZEROPT SLOPE LM K FUNC EOFSET EFACT ANA-ANF ANA-END B1 MX EF AH AL ZF UMIN
01:+0000.0 +1.0000 5. 1 MEAS +00000 32000 +0000.0 +1000.0-01 M1 -- S- E2 05 12.0
BA F BASE VAL:
FA F FACTOR:
EX F FACTOR:
ZC F ZEROPT: 01: -0000.7 °C
SC F SLOPE: 01: +1.0013
MF F MEMORY:
ST F START TIME: 07:00:00
ET F END TIME:
SD F START DATE:01.02.99
ED F END DATE:
FUNCTION

ALMEMO 6290-7B
01: -0273.0 °C
01: +1.0350E-1
01: +1.0350E-1
S0501.2 F0234.5 AR
17:00:00
02.02.99
see man. 6.10.1
0 1
Example: Address 01:
A