Download  Print this page

Advertisement

Chapter 4
Error Messages
Table 4-1
Error Messages (continued)
Error/Warning
ID
Error/Warning Message
EID-6375
Missing L2 internal patchcords between XP cards.
EID-6376
Profile cannot be mapped because the SVLAN is not enabled on
the port.
EID-6377
The configuration must be applied on the working interface in
case of protection group.
EID-6378
Squelch protection action and Auto mode are not compatible in
case of L2 1+1.
EID-6379
The NTP/SNTP server and the Backup NTP/SNTP servers
cannot be the same.
EID-6380
Multishelf VLAN range must be in range of {0} to {1}.
WID-6381
Changing the OTU2_XP card mode to "10GE LAN to WAN"
will reboot the card.
Do you want to continue?
WID-6382
Changing the OTU2_XP card mode from "10GE LAN to
WAN" will reboot the card and delete the pluggable ports 1 and
3.
Do you want to continue?
EID-6383
The board is busy.
Please retry later.
EID-6384
The value "{0}" must be between {1} and {2}.
EID-6385
The value "{0}" has too many decimal points [xx.0 .. xx.9].
EID-6386
The value "{0}" must be a float between {1} and {2}.
EID-6387
The value "{0}" must be a integer between {1} and {2}.
EID-6388
"{0}" is not a valid enumerated value.
EID-6389
Power fail low TCA is greater than high TCA.
EID-6390
Error while setting DISABLE FEC on {0}.
EID-6391
Error while setting STANDARD FEC on {0}.
EID-6392
Error while setting ENHANCED FEC on {0}.
EID-6393
Error while setting SD BER on {0}.
EID-6394
The maximum number of CVLAN ranges cannot exceed 48 in
selective QinQ mode.
EID-6397
Unable to update the FPGA as the STANBY CTX is not ready. Please retry later.
EID-6398
Unable to update the FPGA as the database is busy saving
recent modifications.
1. EID-3159 can appear if you attempt to perform another switching operation within a certain time interval. This interval is an algorithm of three seconds
per working card in the protection group. The maximum interval is 10 seconds.
78-19418-01
Cisco ONS 15310-MA SDH Troubleshooting Guide, Release 9.1 and Release 9.2
Description
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Please retry later.
4-61

Advertisement

Table of Contents

   Related Manuals for Cisco ONS 15454

Comments to this Manuals

Symbols: 0
Latest comments: