Download  Print this page

Advertisement

Table 4-1
Error Messages (continued)
Error/Warning
ID
Error/Warning Message
EID-6356
Multishelf configuration cannot be enabled when IPv4 Access
is disabled on the node.
EID-6357
The Multicast SVLAN field can be modified only when the
MVR feature is disabled.
EID-6358
Too many TRANSLATE QinQ rules per port with MVR feature
enabled.
EID-6359
The PLIM {0} is part of an OCH Trail circuit and its
configuration cannot be changed.
EID-6360
The fiber cut restore operation did not succeed on {1}.
{0}
EID-6361
The resource is already in use, please retry later.
EID-6362
Request timed out, please retry.
EID-6363
An internal communication error was encountered while
retrieving values. Please retry.
EID-6364
Could not perform the requested operation because of a CRS
communication error.
EID-6365
Could not perform the requested operation on PLIM {0}
because that port is already in an LMP data link with neighbor
{1}.
EID-6366
The IP address {0} was not found in the CRS ARP table.
WID-6367
This operation will also change the CRS configuration.
Is it OK to continue?
WID-6368
This operation will also change the CRS configuration.
Moreover, it requires the PLIM shutdown and may be
SERVICE AFFECTING.
Is it OK to continue?
EID-6369
The rollback operation has failed.
EID-6370
The requested operation is not authorized on {0}. Please check
task privileges.
WID-6371
Since you have changed the IP address of one node containing
Server Trail terminations, you should also fix the IP addresses
stored in the nodes connected by these Server Trails.
Run the Server Trail Repair tool to fix these IP addresses.
EID-6372
A Server Trail with the requested ID and old peer IP Address
does not exist.
WID-6373
AIS Squelch action and Link Integrity attribute should not be
simultaneously set on the same port in case of GR3/FAPS:
Profile {0}, Port {1}, SVLAN {2}.
EID-6374
The selected SVLAN is already used for MVR.
Cisco ONS 15310-MA SDH Troubleshooting Guide, Release 9.1 and Release 9.2
4-60
Chapter 4
Description
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Error Messages
78-19418-01

Advertisement

Table of Contents

   Related Manuals for Cisco ONS 15454

Comments to this Manuals

Symbols: 0
Latest comments: