Local Panel Status Messages - Kodak DryView 8100 User Manual

DryView 8100 Laser Imager User Guide
Note
The DryView 8100 Laser Imager displays a Local Panel message (P550) when
preventive maintenance and cleaning are recommended. Preventive
maintenance and cleaning ensure optimum performance of the imager. This
message will not interfere with normal operation. The intent of the message is
to allow the operator to schedule a convenient time to have preventive
maintenance and cleaning performed by a certified technician.
Note
For DryView V2 Keypad error messages, see Section 4.

Local Panel Status Messages

Table 5-1. Local Panel Status Messages
Status Local Panel
Code Message
S00 Self Test
S01 Ready
S02 Warming=#
S04 Stopped
S11 Printing
S12 Calibrate
S13 Contrast
S14 Density
5-2
Explanation
The imager is performing a start-up self test. Please
wait.
The imager is idle and available for printing images.
The imager is warming up. Please wait for Ready
message. (# = the number of minutes remaining until
the imager will be ready to print.) The user can
acquire but not print during the warmup period.
An error condition has caused the imager to stop.
See error message on line 2 of the display.
The imager is printing an image.
The imager is printing a calibration print.
The user can acquire and queue prints but the
calibration film will be printed first.
The imager is printing a contrast test print.
The user can acquire and queue prints, but the
contrast test film will be printed first.
The imager is printing a density test print.
The user can acquire and queue prints, but the
density test film will be printed first.
8754020 2000 March Rev. B