Kodak DryView 8100 User Manual page 52

Status Local Panel
Code Message
S16 Wait
S21 Door Open
S22 Hood Open
S23 Doors Open
S24 Crtg Openg
S25 Crtg Clsng
2000 March Rev. B 8754020
Explanation
1. The imager is completing films in process before
unlatching the front door or,
2. There is an error condition. See error message on
line 2 of the display.
The user can continue to acquire and queue prints,
but the imager will not print until the condition has
been corrected.
The front door is open.
The user can continue to acquire and queue prints,
but the imager will not print until the door has been
closed.
The upper hood is open.
The user can continue to acquire and queue prints,
but the imager will not print until the hood has been
closed.
The front door and upper hood are both open.
The user can continue to acquire and queue prints,
but the imager will not print until the door and hood
have been closed.
The imager is opening the film cartridge after the
front door has been closed.
The user can acquire and queue prints, but the
imager will not print until the cartridge is fully open.
The imager is closing the film cartridge before
unlatching the front door.
The user can continue to acquire and queue prints,
but the imager will not print until the front door is
closed and the cartridge reopened.
Troubleshooting
5-3