Table of Contents
Advertisement
Operation and Maintenance
Opening the Front Door Manually
When power is not applied to the imager, you will of course will not be able to open
the front door via the Local Panel. Use the following "manual" procedure to open the
door.
1. Open the upper hood (see the next page).
2. Insert a thin pencil (or other small instrument) into the slot on the right side of the
processor base (see Figure 3-4).
3. Press down to open the front door.
Door Open Slot
Front Door
Figure 3-4. Opening the Front Door Manually
2000 March Rev. B
8754020
3-7
Advertisement
Table of Contents
