Table of Contents
Advertisement
DryView 8100 Laser Imager User Guide
System Configurations
The DryView 8100 Laser Imager can be used in two system configurations. The key
features of these are described below.
DryView 8100 Laser Imager
The imager connects directly to up to three image source devices. (The standard
unit has one input, but it can be upgraded for additional inputs.)
Copper cables are used for connections to the source imaging device and
keypad.
The operator controls image acquisition and printing from either a keypad or a
console on the host source imaging device.
Dryview 8100 PACS Link Laser Imager
The imager connects to a DICOM medical image network via a PACS Link
Interface.
The imager prints images sent from image source devices or archiving stations
connected to the DICOM network.
1-2
8754020
2000 March Rev. B
Advertisement
Table of Contents
