Table of Contents
Advertisement
DryView 8100 Laser Imager User Guide
DryView V2 Keypad – Imager Menu
The numbered descriptions below correspond to the numbered callouts in
Figure 4-4.
1. Attention Message Area – Displays system status and error messages.
2. Print Density Test Film Key – Initiates the printing of a density test film
containing a SMPTE test pattern.
3. Density Set Keys – Used to increase or decrease the density setting. If AIQC
(Automatic Image Quality Control) is active, the selected Dmax setting is
displayed (range: 1.70 – 3.10 for blue film, and 1.70 to 3.00 for clear film).
4. Imager Polarity Key – Selects positive or negative image polarity.
5. Return Key – Used to return to the Main Menu.
6. Contrast Set Keys – Used to increase or decrease the contrast setting (range: 1
– 15).
7. Print Contrast Test Film Key – Initiates the printing of a contrast test film. The
last image stored is printed in a 15:1 format, using 15 different contrast settings.
8. Image Processing Key – Selects smooth or sharp image processing. (The
choice depends on the personal preference of the viewer.)
4-4
8754020
2000 March Rev. B
Advertisement
Table of Contents
