Using The Keypad To Erase Stored Images - Kodak DryView 8100 User Manual

6. Press the Return key to lock in the new value.
Note
If you know the desired contrast value, you can ignore steps 2, 3, and 4.

Using the Keypad to Erase Stored Images

Press the Erase key on the keypad to enter the Erase Image mode (see Figure 4-9).
In this mode, any or all stored images can be erased.

To erase an individual image, press the Store key for that image. Once all the
desired images have been erased, press the Erase key again to exit the Erase
Image mode.

To erase all stored images, press the Erase All Images key on the Main Menu.
After erasing the images, the keypad automatically exits the Erase Image mode.
Note
When in Erase Image mode, the Erase All Images key is displayed in place of
the Format Menu key on the Main Menu.
2000 March Rev. B 8754020
Laser Imager Status:
Erase
Imager
Menu
Store
Keys
Keypad
Menu
Erase
Figure 4-9. Erasing Stored Images
Using the DryView V2 Keypad
MAIN MENU
Ready
Printed: 0
Copies: 1
Erase
All
Images
Print
Erase
All
Images
4-13