Dryview V2 Keypad - Keypad Menu - Kodak DryView 8100 User Manual

DryView 8100 Laser Imager User Guide
DryView V2 Keypad – Keypad Menu
The numbered descriptions below correspond to the numbered callouts in
Figure 4-5.
1. Attention Message Area – Displays system status and error messages.
2. Display Brightness Set Keys – Increase or decrease the keypad display
brightness.
3. Alarm Beep Volume Set Keys – Increase or decrease the volume of the keypad
alarm beep.
4. Return Key – Used to return to the Main Menu.
5. Auto Print Key – Sets the Auto Print function to ON or OFF. When set to ON, a
print is automatically queued after the last image is stored (the Print key does
not have to be pressed).
6. Auto Format Key – Sets the Auto Format function to ON or OFF. When set to
ON, a new format is automatically displayed (i.e., the LEDs above the Store keys
change from red to green) after a print is queued.
7. Color Blind Mode Key – Sets the Color Blind feature to ON or OFF. When set to
ON, the red LEDs above the Store keys (which indicate used storage locations)
blink instead of staying on constantly. This allows the red LEDs to be
differentiated from the constant green LEDs (which indicate available storage
locations).
Note
When in Erase Image mode, the red LEDs blink regardless of whether the
Color Blind feature is ON or OFF.
8. Key Beep Volume Set Keys – Set the key beep volume.
9. Reset Local Print Counter Key – Resets the print counter on the Main Menu
Display.
4-6
8754020 2000 March Rev. B