Table of Contents
Advertisement
3. Clear the jammed film from the processor area. (There may be more than one
sheet.) If film is jammed in the drive rollers (see Figure 5-6), pull the green thumb
tab to the left to open the rollers and free the film.
4. Close the drum cover and secure it with the two clamps.
5. Close the upper hood. (The processor will have to warm to operating
temperature before printing can occur again.)
Processor
Drum
Area 4
Pull green thumb
tab to the left to
free film jammed
in rollers.
2000 March Rev. B
8754020
Figure 5-6. Jam Area 4
Troubleshooting
8100–53L
5-15
Advertisement
Table of Contents
