Using The Keypad To Format/Acquire/Print - Kodak DryView 8100 User Manual

DryView 8100 Laser Imager User Guide

Using the Keypad to Format/Acquire/Print

1. Power up the imager.
2. On the keypad's Main Menu, press the Copy Count Set keys (see Figure 4-6) to
select the number of copies desired.
3. Press the Format Menu key to access the Format Menu. On that menu, press
the appropriate Format Select key to select the desired format.
4. Press the appropriate Store keys to acquire images.

When an image has been successfully acquired, the light above the
corresponding Store key changes from green to red.

The images are stored on a hard disk in the imager. You can acquire up to
the number of images in the format you selected. For example, if you are
using the 6–image format, you can acquire only six images. You must then
print before you can acquire more images.
5. Once all the images have been acquired for a single film, press the Print key to
place a print request in the print queue.
Figure 4-6. Formatting/Acquiring/Printing
4-8
MAIN MENU
Laser Imager Status:
Print
Imager
Menu
Store
Keys
Keypad
Menu
Erase
Ready
Printed: 0
Copies: 1
Format
Menu
Print
8754020 2000 March Rev. B
Copy
Count
Format
Menu