Garmin Edge 820 Owner's Manual page 56

Turning Incident Detection On and Off
Select > Settings > System > Incident Detection.
Viewing Your Emergency Contacts
Before you can view your emergency contacts on your device, you must set
up your rider information and emergency contacts in the Garmin Connect
Mobile app.
Select > Contacts.
Your emergency contacts' names and phone numbers appear.
Cancelling an Automated Message
When an incident is detected by your device, you can cancel the automated
emergency message on your device or your paired smartphone before it is
sent to your emergency contacts.
Select Cancel >
Sending a Status Update After an Incident
Before you can send a status update to your emergency contacts, your device
must detect an incident and send an automated emergency message to your
emergency contacts.
You can send a status update to your emergency contacts informing them you
are not in need of assistance.
1 Swipe down from the top of the screen to view the connections screen.
2 Select Incident Detected > Send I'm Okay.
A message is sent to all emergency contacts.
Edge 820
®
before the end of the 30-second countdown.
EN
55