Ant+ Sensors; Putting On The Heart Rate Monitor - Garmin Edge 820 Owner's Manual

Your device can be used with wireless ANT+ sensors. For more information
EN
about compatibility and purchasing optional sensors, go to
com.

Putting On the Heart Rate Monitor

You should wear the heart rate monitor directly on your skin, just below your
sternum. It should be snug enough to stay in place during your activity.
1 Snap the heart rate monitor module
The Garmin
2 Wet the electrodes
to create a strong connection between your chest and the transmitter.
3 Wear the heart rate monitor with the Garmin logos facing right-side up.
The hook
4
4 Wrap the strap around your chest, and connect the strap hook to the loop.
56

ANT+ Sensors

logos (on the module and the strap) should be right-side up.
®
and the contact patches
2
and loop connection should be on your right side.
5
onto the strap.
1
on the back of the strap
3
http://buy.garmin.
Edge 820
®