Garmin Edge 820 Owner's Manual page 43

• To select a city, select Cities, and select a nearby city.
• To select an address, select Addresses, and enter the address.
EN
• To select an intersection, select Intersections, and enter the street names.
• To use coordinates, select Coordinates, and enter the coordinates.
3 Select Use.
4 Select Add Next Location.
5 Repeat steps 2 through 4 until you have selected all locations for the route.
6 Select View Map.
The device calculates your route, and a map of the route appears.
TIP: You can select
7 Select Ride.
Following a Course From the Web
Before you can download a course from Garmin Connect, you must have a
Garmin Connect account
1 Connect the device to your computer using the USB cable.
2 Go to www.garminconnect.com.
3 Create a new course, or select an existing course.
4 Select Send to Device.
5 Disconnect the device, and turn it on.
6 Select Navigation > Courses > Saved Courses.
7 Select the course.
8 Select Ride.
42
to view an elevation plot of the route.
(Garmin Connect, page 75) .
Edge 820
®