Time-On Button; Time-Off Button; Time Change; Delete Time On & Off Settings - Electrolux KSV26HRC Service Manual

Time-On Button:

To set the Timer On/Start time, press the Timer On button located on the remote control.
Note: The "ON" symbol will flash in the remote control display.
To adjust the Start time, press the up & down arrows located on the remote control within 5 seconds of pressing the
Timer On button. Refer attached photo.
Note: The Timer On display will adjust in 1 minute increments.
Holding down the up & down arrows will allow the time adjustment to scroll through more rapidly to the desired start time.
Pressing the Timer On button again will cancel the Timer On function.
Note: Default times for Timer On and Off are 8:00 am and 5:00 pm. The clock timer uses a 12 hour clock mode.

Time-Off Button:

To set the Timer Off/Start time, press the Timer Off button located on the remote control. Refer attached photo.
Note: All other functional set-ups are the same as what is illustrated in the (Time-On Button) instructions.

Time Change:

If the timer TIMER OFF or TIMER ON is reset, the unit will operate according to the last timer settings.
If timer ON and timer OFF are set at the same time during operation of the unit, the unit will keep operating at
current status until OFF time is reached.
Note: The unit can still be manually operated while the Time On & Time Off function is active.
Note: The unit will continue to turn On & Off each day in accordance to the previous pre-set On & Off timer settings.
Note: If the ON and OFF time are set at the same time, the OFF command takes priority.
Delete Time On & Off Settings:
To delete the active On & Off timer settings, simply repress the Timer On & Timer Off buttons.
This will delete the relevant icon that appears on the remote control.
Timer On
Timer Off
Page 48 KSSSI116