Electrolux KSV26HRC Service Manual page 121

Remove Main Guide Louver
Remove the supporting pivot pin (located in the centre of
the louver) by pressing from left to right.
Note: The pivot pin should simply pop out.
Then bend the centre of the louver towards you until one
side is dislodged from its pivot support.
Then remove.
Removal of Front Case Assembly
Remove the 9 screws fixing the front case into position.
Unclip the three supporting clamps located at the top back
of the front case, and then simply pull the case assembly
evenly towards you.
Page 121 KSSSI116
Louver, Main
Screw
Bush,
Pivot
Clamp