Chapter 30 Tr-069 Client - ZyXEL Communications Nebula LTE3301-PLUS User Manual

Figure 174 Maintenance > TR-069 Client
The following table describes the fields in this screen.
Table 117 Maintenance > TR-069 Client
LABEL DESCRIPTION
CWMP Active CPE WAN Management Protocol (CWMP) enables the Zyxel Device to be remotely configured
through a WAN link. Communication between the Zyxel Device and the management server is
conducted via SOAP/HTTP(S) in the form of remote procedure calls (RPC).
Click to enable (switch turns blue) to allow the Zyxel Device to be managed by a management
server. Otherwise, click to disable (switch turns gray) to disallow the Zyxel Device to be managed
by a management server.
Inform Click to enable (switch turns blue) the Zyxel Device to send periodic inform through TR-069 on the
WAN. Otherwise, click to disable (switch turns gray).
Inform Interval Enter the time interval (in seconds) at which the Zyxel Device sends information to the auto-
configuration server.
IP Protocol Select the type of IP protocol to allow TR-069 to operate on.
ACS URL Enter the URL or IP address of the auto-configuration server.
ACS User Name Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password Enter the TR-069 password for authentication with the auto-configuration server.

Chapter 30 TR-069 Client

Nebula Mobile Router User's Guide
276