3xLogic VX-3M-F-AWD User Manual page 74

1. Enter the ROI settings interface: Configuration >Video/Audio > ROI
► ROI for Fixed Region
Steps:
a) Toggle the Enable checkbox to enable the Fixed Region function.
b) Select a stream type. The user can set the ROI function for main stream, sub-stream or third stream.
c) Click
to clear it.
NOTE: The number of areas supported in ROI function varies depending on different camera models
d) Select the Region No. from the dropdown list.
e) Adjust the ROI level from 1 to 6. The higher the value, the better the image quality in the ROI region.
f) Enter a Region Name.
ROI for Dynamic Region
►
a) Toggle the Enable Face Tracking checkbox to enable face tracking, and the captured face picture is
set as region of interest. Adjust the ROI level from 1 to 6.
b) Toggle the Enable Target Tracking checkbox to enable target tracking with the target set as region
of interest. Adjust the ROI level from 1 to 6.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Region of Interest (1)
Figure 6-21
Region of Interest (2)
Figure 6-22
and then drag the mouse to draw a red frame in the live view image. Click
VISIX S-Series Network Camera | USER MANUAL v6.0
74