Download  Print this page

Configuring System Settings; System Settings - 3xLogic VX-3M-F-AWD User Manual

Visix s-series.
Hide thumbs


5. Click
These two functions are not enabled by default.

6.4 Configuring System Settings


Viewing Basic Information
Enter the Device Information interface: Configuration > System > System Settings > Basic Information
In the Basic Information interface, you can edit the Device Name and Device No.
Other camera information such as Model, Serial No., Firmware Version, Encoding Version, Web Version,
Plugin Version, Number of Channels, Number of HDDs, Number of Alarm Input, Number of Alarm Output,
and Firmware Version Property are displayed. The information cannot be changed in this menu. It is the
reference for maintenance or modification in future.
Time Settings
Follow the instructions in this section to configure the timestamp to be displayed on the video. There are Time
Zone, Time Synchronization, and Daylight Saving Time (DST) functions for setting the time. Time
Synchronization consists of auto mode by Network Time Protocol (NTP) server and manual mode.
1. Enter the Time Settings interface: Configuration > System > System Settings > Time Settings
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | | (877) 3XLOGIC
VISIX S-Series Network Camera | USER MANUAL v6.0
to save the settings.
Device Information
Figure 6-41


Table of Contents

   Also See for 3xLogic VX-3M-F-AWD

   Related Manuals for 3xLogic VX-3M-F-AWD

Comments to this Manuals

Symbols: 0
Latest comments: