Table of Contents
Advertisement
day.
5.
Set the Alarm Actions for Motion Detection. Click
interface.
The user can specify the camera's response when an event occurs. This is referred to as a linkage method. The
following contents are about how to configure the different types of linkage methods.
Toggle the checkbox to select the linkage method. Notify Surveillance Center, Send Email, Upload to
FTP/Memory/NAS, Trigger Alarm Output and Trigger Recording methods can be selected..
Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event occurs.
Send Email
Send an email with alarm information to a user or users when an event occurs.
NOTE:
To send an Email when an event occurs, you need to refer to Configuring Email Settings to
set the Email parameters.
Upload to FTP/Memory/NAS
Capture the image when an alarm is triggered and upload the picture to an FTP server.
NOTE:
FTP parameters must be configured. Refer to Configuring FTP Settings for setting FTP
parameters.
Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
NOTE:
To trigger an alarm output when an event occurs, refer to Section 5.2.5 Configuring Alarm
Output to set the alarm output parameters.
Trigger Recording
Record a video when an event occurs.
NOTE:
You have to set the recording schedule to utilize this function. Refer to Section 5.1.1
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VISIX S-Series Network Camera | USER MANUAL v6.0
Linkage Method
Figure 5-14
tab to enter the Linkage Method
39
Hide quick links:
Advertisement
Table of Contents
