Basic Operation; Configuring Local Parameters - 3xLogic VX-3M-F-AWD User Manual

4

Basic Operation

4.1 Configuring Local Parameters

The Local Configuration settings allow the user to set the parameters for live view, recorded files and captured
pictures/stills. The recorded files and captured pictures/stillshots can be captured using the camera's browser
UI and are saved to a destination path on your local system.
Steps:
1. Enter the Local Configuration interface: Configuration > Local.
2. Configure the following settings:
Live View Parameters:
Set the Protocol Type and Live View Performance settings.
Protocol Type: TCP, UDP, MULTICAST and HTTP are selectable.

► TCP: Ensures complete delivery of streaming data and better video quality, however, real-
time transmission will be affected (skipped frames, etc...)
UDP: Provides real-time audio and video streams though video quality may be lowered
►
due to bandwidth limitations.
► HTTP: Allows the same quality as TCP without setting specific ports for streaming under
some network environments.
► MULTICAST: It's recommended to select MCAST type when using the Multicast function.
For detailed information about Multicast, refer to
Configuring TCP/IP Settings.
Play Performance: Set the play performance to Shortest Delay or Auto.

Rules: Refers to on-screen tracking for rules configured on the camera. Select enable or disable to

display or not display colored trackers when motion detection, face detection, or intrusion detection
is triggered. E.g., If face detection is enabled and this option is active, when a face is detected it will
be marked with a green rectangle on the live view.
Image Format: Choose the image format for picture/stillshot capture.

Record File Settings
Set the destination of recorded video files. Applies only for video recorded manually via the browser UI.
Record File Size: Select the packed size of the manually recorded and downloaded video files to

10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VISIX S-Series Network Camera | USER MANUAL v6.0
Local Configuration Interface
Figure 4-1
Section 9.1 Configuring Basic Settings –
19