2. Toggle the Enable Smart Tracking check box to enable the smart tracking function.
3. Click the PTZ buttons to select an object.
4. Click
to set the current zoom ratio as the tracking zoom ratio.
5. Set the tracking duration. The speed dome stops tracking when the duration time is up. The duration
ranges from 0 to 300 seconds.
Setting the duration to 0 will cause the smart tracking to continuously track detected
objects.
NOTE:
This function varies depending on different camera models.
6. Click
PRIORITIZE PTZ
Steps:
1. Enter the Prioritize PTZ interface: Configuration > PTZ > Prioritize PTZ.
2. Select Network or RS-485 from the dropdown list
3. Set the delay time (Range 2-200s).
4. Click
POSITION SETTINGS
Purpose:
The user can set the camera's directional compass and position information in this interface.
Steps:
1. Enter the Position Settings interface: Configuration > PTZ > Position Settings
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VISIX S-Series Network Camera | USER MANUAL v6.0
Configure Smart Tracking
Figure 5-34
to clear the settings.
to save the settings.
58
Need help?
Do you have a question about the VX-3M-F-AWD and is the answer not in the manual?