Setting/Calling A Pattern - 3xLogic VX-3M-F-AWD User Manual

6. Click OK to save a patrol.
7. Click to start the patrol, and click
8. (Optional) Click

SETTING/CALLING A PATTERN

Purpose:
A pattern is a memorized series of pan, tilt, zoom, and preset functions. It can be called on the pattern settings
interface. There are up to 4 patterns for customizing.
NOTE: Pattern function varies depending on different camera models.
Setting a Pattern:

Steps:
1. In the PTZ control panel, click
2. Select a pattern number from the list as shown in Figure 4-9.
3. Click to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the information of PROGRAM
PATTERN REMAINNING MEMORY (%) is displayed on the screen.
Pan the camera to the right or left.

Tilt the camera up or down.

Zoom in or out.

Refocus the lens.

5. Click to save all the pattern settings.
Buttons on the Patterns interface:

Buttons
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
Add Patrol Path
Figure 4-8
to stop it.
to delete a patrol.
to enter the pattern settings interface.
Patterns Settings Interface
Figure 4-9
Description
Start the selected patrol/pattern.
Stop current patrol/pattern.
Set the selected preset/patrol.
VISIX S-Series Network Camera | USER MANUAL v6.0
25