Setting/Calling A Patrol - 3xLogic VX-3M-F-AWD User Manual

Preset Function
33 Auto flip
34 Back to initial position
35 Call patrol 1
36 Call patrol 2
37 Call patrol 3
38 Call patrol 4
39 Day mode (IR cut filter in)
40 Night mode (IR cut filter out)
41 Call pattern 1
42 Call pattern 2
43
Call pattern 3
44
Call pattern 4
45 One-touch Patrol
90 Wiper
NOTE: You may need to use the OSD (On Screen Display) menu when controlling the camera remotely. To
display the OSD menu on the live view screen, you can call the preset number 95.

SETTING/CALLING A PATROL

NOTE:
No less than 2 presets must be configured before you set a patrol.
Steps:
1. Click to enter the patrol configuration interface.
2. Select a path No., and click
3. Select the preset, and input the patrol duration and patrol speed.
4. Click OK to save the first preset.
5. Follow the steps above to add the other presets.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VISIX S-Series Network Camera | USER MANUAL v6.0
Table 1-1 Special Presets
Preset
92
93
94
95
96
97
98
99
100
101
102
103
104
105
Special Preset
Figure 4-7
to add the configured presets.
Function
Start to set limit stops
Set limit stops manually
Remote reboot
Call OSD menu
Stop a scan
Start random scan
Start frame scan
Start auto scan
Start tilt scan
Start panorama scan
Call patrol 5
Call patrol 6
Call patrol 7
Call patrol 8
24