Table of Contents
Advertisement
7.1 Operation limits
• The weighing bridges are designed extremely robust. However the load limits
according to the following table should not be exceeded!
• Depending on the type of load receptacle, the static carrying capacity, i.e. the
maximum admissible load is:
7.2 Operation with access ramps
• The load plate of the weighing bridge is an active weighing element, the access
ramps are passive, i.e. during the weighing process all wheels of the conveying
vehicles must rest on the load plate.
• The air gap between the load plate and the access ramps must be free. Especially
for weighing of grainy or small-piece weighing goods, the gap should be controlled
regularly and kept clear.
7.3 Load/unload weighing system
• Place the load on the scales using a lifting truck, a crane or a forklift truck. Ensure
that the load is not swinging when it is placed onto the scales.
• Lift the load first vertically at least 10 cm above the scales before it is removed or
newly placed.
KFP V20NM-IA-e-1511
Weighing ranges
With centrical load
With side stress
With one-sided loading
With single-wheel load
600kg
1500kg 3000kg 6000kg
900kg
2250kg 4500kg
600kg
1500kg 3000kg
300kg
750kg
1500kg
600kg
1500kg 3000kg
9000kg
6000kg
3000kg
6000kg
11
Advertisement
Table of Contents
