Remote Double-Point Status Inputs; Direct Inputs; Contact Outputs - GE L90 Instruction Manual

6.2 STATUS
PATH: ACTUAL VALUES
REMOTE DPS INPUTS
The present state of the remote double-point status inputs is shown here. The actual values indicate if the remote double-
point status inputs are in the on (close), off (open), intermediate, or bad state.
PATH: ACTUAL VALUES

DIRECT INPUTS

6
The present state of the direct inputs from communications channels 1 and 2 are shown here. The state displayed will be
that of the remote point unless channel 1 or 2 has been declared to have "failed", in which case the value shown is the pro-
grammed default state defined in the
PATH: ACTUAL VALUES

CONTACT OUTPUTS

6-4
STATUS REMOTE DPS INPUTS
REMOTE DPS INPUT
STATUS: Bad
REMOTE DPS INPUT
MESSAGE
STATUS: Bad
REMOTE DPS INPUT
MESSAGE
STATUS: Bad
STATUS DIRECT INPUTS
DIRECT INPUT 1-1:
Off
DIRECT INPUT 1-2:
MESSAGE
Off
DIRECT INPUT 1-8:
MESSAGE
Off
DIRECT INPUT 2-1:
MESSAGE
Off
DIRECT INPUT 2-2:
MESSAGE
Off
DIRECT INPUT 2-8:
MESSAGE
Off
SETTINGS INPUTS/OUTPUTS
STATUS CONTACT OUTPUTS
Cont Op 1
Off
Cont Op 2
MESSAGE
Off
Cont Op xx
MESSAGE
Off
L90 Line Current Differential System

6.2.4 REMOTE DOUBLE-POINT STATUS INPUTS

Range: On, Off, Intermediate, Bad
1
Range: On, Off, Intermediate, Bad
2
↓
Range: On, Off, Intermediate, Bad
5
Range: On, Off
Range: On, Off
↓
Range: On, Off
Range: On, Off
Range: On, Off
↓
Range: On, Off
DIRECT DIRECT INPUTS
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off, VOff, VOn, IOn, IOff
↓
Range: On, Off, VOff, VOn, IOn, IOff
6 ACTUAL VALUES
6.2.5 DIRECT INPUTS
menu.
6.2.6 CONTACT OUTPUTS
GE Multilin