Point List; D.1.2 Point List - GE L90 Instruction Manual

APPENDIX D
Maximum range of values k:
Maximum range of values w:
Portnumber:
PARAMETER VALUE
Portnumber 2404
RFC 2200 suite:
RFC 2200 is an official Internet Standard which describes the state of standardization of protocols used in the Internet
as determined by the Internet Architecture Board (IAB). It offers a broad spectrum of actual standards used in the Inter-
net. The suitable selection of documents from RFC 2200 defined in this standard for given projects has to be chosen
by the user of this standard.
Ethernet 802.3
Serial X.21 interface
Other selection(s) from RFC 2200 (list below if selected)
The IEC 60870-5-104 data points are configured through the
menu. Refer to the Communications section of Chapter 5 for additional details.
IEC104 POINT LISTS
GE Multilin
15
1 to 32767 (2 – 1) APDUs, accuracy 1 APDU
1 to 32767 APDUs, accuracy 1 APDU
Recommendation: w should not exceed two-thirds of k.
REMARKS
In all cases
SETTINGS
L90 Line Current Differential System
D.1 IEC 60870-5-104
PRODUCT SETUP COMMUNICATIONS
D

D.1.2 POINT LIST

DNP /
D-9