Uploading L90 Switch Module Firmware - GE L90 Instruction Manual
L90 line current differential system ur series
Hide thumbs
Also See for L90:
- Instruction manual (900 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (486 pages)
Table of Contents
Advertisement
3 HARDWARE
The system will request the name and destination path for the settings file.
3.
Navigate to the folder containing the Ethernet switch settings file, select the file, then click Open.
The settings file will be transferred to the Ethernet switch and the settings uploaded to the device.
a) DESCRIPTION
This section describes the process for upgrading firmware on a UR-2S or UR-2T switch module.
There are several ways of updating firmware on a switch module:
•
Using the EnerVista UR Setup software.
•
Serially using the L90 switch module console port.
•
Using FTP or TFTP through the L90 switch module console port.
It is highly recommended to use the EnerVista UR Setup software to upgrade firmware on a L90 switch module.
Firmware upgrades using the serial port, TFTP, and FTP are described in detail in the switch module manual.
NOTE
b) SELECTING THE PROPER SWITCH FIRMWARE VERSION
The latest switch module firmware is available as a download from the GE Multilin web site. Use the following procedure to
determine the version of firmware currently installed on your switch
1.
Log into the switch using the EnerVista web interface.
The default switch login ID is "manager" and the default password is "manager".
NOTE
GE Multilin
3.4 MANAGED ETHERNET SWITCH MODULES
3.4.5 UPLOADING L90 SWITCH MODULE FIRMWARE
L90 Line Current Differential System
3
3-43
Advertisement
Table of Contents
