IE-SW-VL08M Series User's Manual
Email Warning Events Settings
NOTE: The user interface for the IE-SW-VL08M shows 8 ports.
Event Types
Event Types can be divided into two basic groups: System Events and Port Events. System Events
are related to the overall function of the switch, whereas Port Events are related to the activity of a
specific port.
Switch Cold Start
Switch Warm Start
Power Transition (On Off)
Power Transition (Off On)
Configuration Change Activated
Comm. Redundancy Topology
Changed
Authentication Failure
Link-on
Link-off
Traffic-Overload
System Event
Port Event
Warning e-mail is sent when...
Power is cut off and then reconnected.
The device is rebooted, such as when network
parameters are changed (IP address, netmask, etc.).
The device is powered down.
The device is powered up.
Any configuration item is changed.
If any Spanning Tree Protocol switches have changed
their position (applies only to the root of the tree). If
the Master of Turbo Ring has changed or backup path
is activated.
An incorrect password is entered.
Warning e-mail is sent when...
The port is connected to another device.
The port is disconnected (e.g., the cable is pulled out,
or the opposing device shuts down).
The port's traffic surpasses the Traffic-Threshold for
that port (provided this setting is Enabled).
3-61
Featured Functions