Weidmuller IE-SW-VL08M Series User Manual page 67

IE-SW-VL08M Series User's Manual
ATTENTION
For communication redundancy in the VLAN environment, set "Redundant Port," "Coupling
Port," and "Coupling Control Port" as "Trunk Port," since these ports act as the "backbone" to
transmit all packets of different VLANs to different Ethernet Switches.
Port PVID
Setting
VID range from 1
to 4094
Fixed VLAN List (Tagged)
Setting
VID range from 1
to 4094
Forbidden VLAN List
Setting
VID range from 1
to 4094
To configure the Port-based VLAN, use the VLAN Setting page to configure the ports.
VLAN Mode
Setting
802.1Q VLAN
Port-based VLAN Set VLAN mode to Port-based VLAN
tagged and/or untagged devices and/or other
switches/hubs.
Description
Set the port default VLAN ID for untagged devices that
connect to the port.
Description
This field will be active only when selecting the "Trunk"
port type. Set the other VLAN ID for tagged devices that
connect to the "Trunk" port. Use commas to separate
different VIDs.
Description
This field will be active only when selecting the "Trunk"
port type. Set the VLAN IDs that will not be supported by
this trunk port. Use commas to separate different VIDs.
Description
Set VLAN mode to 802.1Q VLAN
3-51
Featured Functions
Factory Default
1
Factory Default
None
Factory Default
None
Factory Default
802.1Q VLAN