Weidmuller IE-SW-VL08M Series User Manual page 91

IE-SW-VL08M Series User's Manual
Syslog Server 1
Setting
IP Address
Port Destination
(1 to 65535)
Syslog Server 2
Setting
IP Address
Port Destination
(1 to 65535)
Syslog Server 3
Setting
IP Address
Port Destination
(1 to 65535)
NOTE
The following events will be recorded into the IE-SW-VL08M's Event Log table, and will then be
sent to the specified Syslog Server:
1. Cold start
2. Warm start
3. Configuration change activated
4. Power 1/2 transition (Off
5. Authentication fail
6. Topology changed
7. Master setting is mismatched
8. DI 1/2 transition (Off
9. Port traffic overload
10. dot1x Auth Fail
11. Port link off / on
Description
Enter the IP address of 1st Syslog Server used by
your network.
Enter the UDP port of 1st Syslog Server.
Description
Enter the IP address of 2nd Syslog Server used by
your network.
Enter the UDP port of 2nd Syslog Server.
Description
Enter the IP address of 3rd Syslog Server used by
your network.
Enter the UDP port of 3rd Syslog Server.
On), Power 1/2 transition (On
On), DI 1/2 transition (On
3-75
Featured Functions
Factory Default
None
514
Factory Default
None
514
Factory Default
None
514
Off)
Off)