Weidmuller IE-SW-VL08M Series User Manual page 72

IE-SW-VL08M Series User's Manual
IGMP Snooping Enhanced Mode
Setting
Enable
Disable
Query Interval
Setting
Numerical value
input by user
IGMP Snooping
Setting
Enable/Disable
NOTE
We suggest the following IGMP Snooping configurations:
When the network is mixed with third party switches, such as Cisco:
Select IGMP Snooping Enable:
Clear IGMP Snooping Enhanced Mode:
When the network consists entirely of Weidmueller switches:
Select IGMP Snooping Enable-
Select IGMP Snooping Enhanced Mode-
Querier
Setting
Enable/Disable
Static Multicast Router Port
Setting
Select/Deselect
NOTE
At least one switch must be designated the Querier or enable IGMP snooping and GMRP when
enabling Turbo Ring and IGMP snooping simultaneously.
Description
IGMP Multicast packets will forward to :
Learned Multicast Querier Ports
Member Ports
IGMP Multicast packets will forward to :
Learned multicast Querier Ports
Static Multicast Querier Ports
Querier Connected Ports
Member Ports
Description
Set the query interval of the Querier function globally.
Valid settings are from 20 to 600 seconds.
Description
Select the option to enable the IGMP Snooping
function per VLAN.
Description
Select the option to enable the querier function.
Description
Select the option to select which ports will connect to
the multicast routers. It's active only when IGMP
Snooping is enabled.
3-56
Featured Functions
Factory Default
Enable
Factory Default
125 seconds
Factory Default
Enabled if IGMP
Snooping Enabled
Globally
Factory Default
Enabled if IGMP
Snooping is Enabled
Globally
Factory Default
Disabled