Weidmuller IE-SW-VL08M Series User Manual page 22

IE-SW-VL08M Series User's Manual
IPv4
The IPv4 settings include the switch's IP address and subnet mask, as well as the IP address of the
default gateway. In addition, input cells are provided for the IP addresses of a 1st and 2nd DNS
server.
IPv6
IPv6 setting includes two distinct address types—Link-Local Unicast address and Global Unicast
address. A Link-Local address makes the switch accessible over IPv6 for all devices attached to the
same local subnet. To connect to a larger network with multiple segments, the switch must be
configured with a Global Unicast address.
See a brief explanation of each configuration item below.
Auto IP Configuration
Disable
By DHCP
By BOOTP
Switch IP Address
IP Address of the
IE-SW-VL08M
Setting
Set up the IE-SW-VL08M's IP address
manually.
The IP address will be assigned automatically
by the network's DHCP server.
The IP address will be assigned automatically
by the network's BOOTP server.
Setting
Identifies the IE-SW-VL08M on a TCP/IP
network.
Description
Description
3-6
Featured Functions
Factory Default
Disable
Factory Default
192.168.127.253