Password - Weidmuller IE-SW-VL08M Series User Manual

IE-SW-VL08M Series User's Manual
Max.30
Characters
Web Configuration
Disable / http or https /
https only
Web Auto-logout (s)
60 to 86400 (seconds)
Age time (s)
15 to 3825 (seconds)

Password

The Weidmueller switch provides two levels of access privileges: admin privilege gives read/write
access to all switch configuration parameters; user privilege provides read access only—you will be
able to view the configuration, but will not be able to make modifications.
ATTENTION
The IE-SW-VL08M's default Password is set to "Detmold".
If a Password is set, then you will be required to type the Password when logging into the RS-232
Console, Telnet Console, or Web Browser interface.
Use this to record contact information of the
person responsible for maintaining this
IE-SW-VL08M switch.
Setting
You can select disable, or accept both http and
https, or https only, from the web console
Setting
Disable or extend the auto-logout time for the
web management console.
Setting
The length of time that a MAC address entry
can remain in the Weidmueller switch. When
an entry reaches its aging time, it "ages out"
and is purged from the switch, effectively
cancelling frame forwarding to that specific
port.
Description
Description
Description
3-2
Featured Functions
None
Factory Default
http or https
Factory Default
0 (disable)
Factory Default
300