Weidmuller IE-SW-VL08M Series User Manual page 43

IE-SW-VL08M Series User's Manual
Explanation of "Settings" Items
Redundancy Protocol
Setting
Turbo Ring
Turbo Ring V2
Turbo Chain
RSTP (IEEE
802.1W/1D)
None
Set as Master
Setting
Enabled
Disabled
Redundant Ports
Setting
1st Port
2nd Port
Enable Ring Coupling
Setting
Enable
Disable
Coupling Port
Setting
Coupling Port
Coupling Control Port
Setting
Coupling Control Port
Description
Select this item to change to the Turbo
Ring configuration page.
Select this item to change to the Turbo
Ring V2 configuration page.
Select this item to change to the Turbo
Chain configuration page.
Select this item to change to the RSTP
configuration page.
Ring redundancy is not active
Description
Select this Switch as Master
Do not select this Switch as Master
Description
Select any port of the Switch to be one of
the redundant ports.
Select any port of the Switch to be one of
the redundant ports.
Description
Select this Switch as Coupler
Do not select this Switch as Coupler
Description
Select any port of the Switch to be the
coupling port
Description
Select any port to be the coupling control
port
3-27
Featured Functions
Factory Default
None
Factory Default
Not checked
Factory Default
Port 4
Port 7
Port 5
Port 8
Factory Default
Not checked
Factory Default
Port 2
Port 5
Factory Default
Port 3
Port 6