Import Configuration - Weidmuller IE-SW-VL08M Series User Manual

Import Configuration

The Import Configuration function is used to import an entire configuration from a text file to the
Switch. This utility can be used to transfer the configuration from one Switch to another, by first
using the Export Configuration function (described in the previous section) to save a switch
configuration to a file, and then using the Import Configuration function. Do the following to import
a configuration:
1. Highlight the server (from the Weidmueller Switch list in the Configurator window's left pane),
and then click the Import toolbar icon
Configuration menu.
2. Click Open to navigate to the text file that contains the desired configuration. Once the file is
selected, click Open again to initiate the import procedure.
3. The Setup Configuration window will be displayed, with a special note attached at the lower
portion of the window. Parameters that have been changed will be activated with a checkmark.
You may make more changes if necessary, and then click OK to accept the changes.
Weidmüller Switch Configuration Utility
, or select Import Configuration from the
A-7