Table of Contents
Advertisement
IE-SW-VL08M Series User's Manual
3. The Master DIP Switch is set to "ON".
Please refer to "Configuring Basic Settings—Turbo Ring DIP Switch" for more details.
Link-on
Link-off
Traffic-Overload
Traffic-Threshold (%)
Traffic-Duration (sec.)
NOTE
The Traffic-Overload, Traffic-Threshold (%), and Traffic-Duration (sec) Port Event items are
related. If you Enable the Traffic-Overload event, then be sure to enter a nonzero Traffic-Threshold
percentage, as well as a Traffic-Duration between 1 and 300 seconds.
Override Relay Warning Settings
Click the checkbox to override the relay warning setting temporarily. Releasing the relay output will
allow administrators to fix any problems with the warning condition.
Relay Warning List
Use this table to see if any relay warnings have been issued.
Using Line-Swap-Fast-Recovery
The Line-Swap Fast Recovery function, which is enabled by default, allows the IE-SW-VL08M to
return to normal operation very quickly after devices are unplugged and then re-plugged into
different ports. The recovery time is in the order of a few milliseconds. Compare this with standard
commercial switches for which the recovery time could be in the order of several minutes. To
disable the Line-Swap Fast Recovery function, or to re-enable the function after it has already been
disabled, access either the Console utility's Line-Swap recovery page, or the Web Browser
interface's Line-Swap fast recovery page, as shown next.
Port Event
Warning e-mail is sent when...
The port is connected to another device.
The port is disconnected (e.g., the cable is pulled out,
or the opposing device shuts down).
The port's traffic surpasses the Traffic-Threshold for
that port (provided this setting is Enabled).
Enter a nonzero number if the port's
Traffic-Overload setting is Enabled.
A Traffic-Overload warning is sent every
Traffic-Duration seconds if the average
Traffic-Threshold is surpassed during that time
period.
3-65
Featured Functions
Hide quick links:
Advertisement
Table of Contents
