Network - Weidmuller IE-SW-VL08M Series User Manual

IE-SW-VL08M Series User's Manual
Name
Setting
Max. 63
Characters
Port Transmission Speed
Setting
Auto
100M-Full
100M-Half
10M-Full
10M-Half
FDX Flow Control
This setting enables or disables the flow control capability of this port when the port transmission
speed setting is on auto mode. The final result will be determined by the auto process between the
IE-SW-VL08M and the connected device.
Setting
Enable
Disable
Port Type
Setting
Auto
MDI
MDIX

Network

The Network configuration allows users to configure both IPv4 and IPv6 parameters for
management access over the network. The IE-SW-VLxxM series supports both IPv4 and IPv6, and
can be managed through either of these address types.
Description
Specify an alias for each port, and assist the
administrator in remembering important
information about the port.
E.g., PLC 1
Description
Allows the port to use the IEEE 802.3u protocol
to negotiate with connected devices. The port
and connected devices will determine the best
speed for that connection.
Choose one of these fixed speed options if the
Ethernet device at the other end has trouble
auto-negotiating for line speed.
Description
Enables the flow control capability of this port
when in auto-nego mode.
Disables the flow control capability of this port
when in auto-nego mode.
Description
Allows the port to auto detect the port type of
the Ethernet device at the other end and change
the port type accordingly.
Choose the MDI or MDIX option if the
Ethernet device at the other end has trouble
auto-negotiating for port type.
3-5
Featured Functions
Factory Default
None
Factory Default
Auto
Factory Default
Disable
Factory Default
Auto