Weidmuller IE-SW-VL08M Series User Manual page 45

IE-SW-VL08M Series User's Manual
Ring 1/2—1st Ring Port Status
Ring 1/2—2nd Ring Port Status
The "Ports Status" indicators show Forwarding for normal transmission, Blocking if this port is
connected to a backup path and the path is blocked, and Link down if there is no connection.
Coupling—Mode
Indicates either None, Dual Homing, or Ring Coupling.
Coupling—Coupling Port status
Indicates either Primary, or Backup.
Explanation of "Settings" Items
Redundancy Protocol
Setting
Turbo Ring
Turbo Ring V2
Turbo Chain
RSTP (IEEE
802.1W/1D)
None
Enable Ring 1
Setting
Enabled
Disabled
Enable Ring 2*
Setting
Enabled
Disabled
*You should enable both Ring 1 and Ring 2 when using the Dual-Ring architecture.
Set as Master
Setting
Enabled
Disabled
Redundant Ports
Setting
1st Port
2nd Port
Description
Select this item to change to the Turbo Ring
configuration page.
Select this item to change to the Turbo Ring
V2 configuration page.
Select this item to change to the Turbo
Chain configuration page.
Select this item to change to the RSTP
configuration page.
Ring redundancy is not active
Description
Enable the Ring 1 settings
Disable the Ring 1 settings
Description
Enable the Ring 2 settings
Disable the Ring 2 settings
Description
Select this switch as Master
Do not select this switch as Master
Description
Select any port of the switch to be one of
the redundant ports.
Select any port of the switch to be one of
the redundant ports.
3-29
Featured Functions
Factory Default
None
Factory Default
Not checked
Factory Default
Not checked
Factory Default
Not checked
Factory Default
Port 4
Port 7
Port 5
Port 8