GE 469 Instruction Manual page 119

CHAPTER 4: INTERFACES
Note
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
Click Finish to complete the Auto-Config procedure.
The Motor Settings Auto-Config window will disappear.
A new Settings File containing the parameters you have just input will appear in
the Files pane as shown:
Creating a New Settings File without using Motor Settings Auto-Config
The EnerVista 469 Setup software allows the user to create new Settings files independent
of a connected device. These can be uploaded to a relay at a later date. The following
manual procedure - as distinct from the Motor Settings Auto-Config option described
above - illustrates how to create new Settings Files.
In the File pane, right click on File.
Select the New Settings File item.
The EnerVista 469 Setup software displays the following window,
allowing the configuration of the Settings File as shown below.
Note that this window allows you to choose between creating your Settings File
manually or using the Motor Settings Auto-Config as detailed above.
4–29